What LED lights are installed Notes

More LED information, please click Real Green Lighting Company Limited

LED lights with mounting PRECAUTIONS: LED lights with wiring


LED lights with general voltage DC 12V, so need to use switching power supply, according to the size of the power supply and the connection length LED lights to be. Wiring monochrome 5050 SMD LED lights to distinguish between positive and negative, we generally provide good welding power plug directly into us like a lamp with a power above, if you do not want each LED lights are used a power source control, you can buy a relatively large power switch power to do the total power, then all the LED lights with all the input power in parallel, unified by the total switching power supply.

LED lights with the Installation Notes: Controller connection

LED ticker tape and Symphony of lights with RGB controller is required to achieve the effect of changing the wiring of the time. Symphony of lights are generally common anode, which is on top of a lamp with a + 12V negative RGB three others are negative, and the control wiring distance of each controller is not the same, in general, simple control control the distance of 10-15 meters, from the remote controller to control 15 to 20 meters, the longest can control up to 30 meters away.

LED lights with the Installation Notes: Note LED lights with the connection distance

Generally speaking, LED lights with its connection distances up to 20 meters, if you exceed this distance connection, the LED lights are easy to heat, the use of the process will affect the LED lights with life. Therefore, the installation must be installed in accordance with the requirements of manufacturers, should not allow LED lights with overload operation.